Amrutha Technologies

Sensor: high-precision semiconductor alcohol sensor

Detection range: 0.000 - 0.1997c BAC; 0.000 - 0.995mg/L (BrAC)

Alarm point: 0.050% BAC; 0. 250mg/L(BrAC)

      Accuracy: + 0.010% BAC; + /-0.050 mg/L

 Response  Time:  <5s                  warm-up time: <15s Operating voltage: 3 x “AAA” alkaline battery Operating current:      l20mA

Operating environment: -10°C - 50°C

Screen: Orange backlight 3-digit LCD screen

• Accurate, sleek and Reliable Portable Breath Alcohol Tester
• Also, can check in Passive Mode
• DOT and FDA Approved
• No Calibration Required. Comes with Pre-Calibrated Sensor Module. Sensor Module Replaceable at additional cost
• Includes 5 no. free mouthpieces, storage pouch

Specification:

- Measurement Mode: Active Mode and Passive Mode

- Sensor type: Fuel cell Sensor

- Display: 2.8-inch full graphic TFT display

- Mouth Pieces: Yes

- Measurement Range: (0-550) mg/100ml BAC

- Memory: 20,000

- Zeroing Time: < 5 sec

- Operating Temp: -5C +50ºC

- Printer: In-Built.

- Real Time clock: Yes.

- Measurement time: < 10 sec

- Battery: 7.4V, 1300mAH rechargeable Li-ion battery

- Device Interface: USB data can be transmitted to Printer or PC

- Software Moment: Data transmit and storage option

- Dimension: 180mm x 70mm x 30mm

- Weight: 250gm

Thanks for using our hand‐held breath alcohol analyzer: AT-Police is a rapid breath alcohol analyzer for quick testing with following features:

1. UK made Electrochemical/Fuel cell sensor with high reliability;                        2. Quick and Precise Analysis;                                                                                       3. Rapid and convenient, do not need mouthpieces;                                               4. With Traffic baton and flashlight illumination function                                       5. Large battery capacity, can testing for 8 hours.

Technique Data

           •  Sensor                                 Fast fuel cell 
                    •  Measurement range               0-1OOmg/ 1OOml 
                   •  Measurement time                 Minimum 1 second, adjustable 

•  Zeroing time                          < 5 seconds 

•  Blow volume                          1.0L or according to customer requirement 

•  Display                                  Digital and full graphic backlight display 

•  Data store                              up to 50'.XJ measured value 
•  Real time clock                     No                                              •  Battery                                  Li-ion , rechargeable battery 

•  Calibration                             Every 12 months

•  Operation  temperature          -s·c to +SCJ°C

•  Alarm                                    Red, yellow, green LED indication,          

•                                               alarm limit can be adjusted

• 

Product Features:

• Menu operation, easy to use
• Results review on the device
• Data memory for 50,000 measurement
• Wireless printer

Technical Data:

• Sensor Fast fuel cell
• Measurement range 0-550mg/100ml
• Measurement accuracy 0-80mg/100ml; +5mg/100ml
• Real time clock yes
• Battery Rechargeable Li-ion battery / AA Alkaline batteries
• Calibration Every 6 months

Features: 
1) Dual LCD displays
2) Digital alcohol tester with 0.01 % BAC (0.1g/L) increment for reading
3) Detect range: 0.00~0.19 % BAC & 0.0~1.9g/L
4) Alert level calibrated
5) Quick response and resume
6) Auto power off
7) Clock with 12/24 formats
8) Alarm time function
9) Countdown & count-up timer keep the deadline of your parking
10) Temperature: OC & of display
11) Clock use 1 X AG13 battery (included), alcohol tester use 2 X AAA alkaline batteries (not included)
12) Unit size: 100 X 37 X 17mm

Specifications:

• Keyboard : 5 keys operation: ,“Up”, “Down”, “Left”, “Right”, “OK”
• Power Supply : Interchangeable rechargeable battery
• Heat warm up : Chamber & Sensor warm up automatically
• Auto flow monitoring : Flow detect automatically (Patented)
• Compact sampling system : Low power consumption (Patented)
• Passive test : Quick test within 1 sec.
• Measurement Accuracy : +/–0.03 mg/L at alert point, drift typically < 1.0 % of the measurement value/month
• Standard gift box packing : Including White box; 2 pcs blow tubes, USB charger cable;
• Optional packing/ accessory: Metal case; mouthpiece, rechargeable battery

Professional Alcohol Breath Analyser Model – A30

• Touch Screen with Inbuilt Thermal Printer
• 20,000 Memories
• Data collection report using PC Software utility

Specification:

• Sensor type: flat surfaced alcohol sensor
• Working Voltage: DC4.5V (3×AAA)Batteries
• Working Current: ≤120mA
• Working Environment: Temperature -10°C~50°C
• Relative Humidity ≤95% No Dews 
• Detection Range: 0.00~1.00mg/L 0.00~0.20ºC; 0.00~2.00g/L; 0.00~2.00‰BAC
• Alarming Level: 0.25mg/L (0.05ºC, 0.50g/L; 0.50‰BAC)
• Accuracy: ±10% F.S
• Response Time: Resume Time: ≤20s 
• Display: 3 digits LCD display with light blue backup
• Dimension: 103×65×27mm (L×W×H), ≤64 g Battery excluded
• Battery expectancy time: ≥200Times

SPECIFICATIONS

_ Build in DSP microprocessor technology, Sensor Highly selective semi-conductive oxide.  CE approval by FIMKO

_ Warm up time             :  less than 20 seconds (typical)

_ Power source               :  9V NI MH Rechargeable battery.

 _ Size                              :  115x60x23mm

_ Measuring range          :  0.00-2.0(1.00mg/L)

_ Accuracy                      :  +/- 0.015%BCA at 0.05%BAC

_ Blowing time               :  4 to 5 seconds continuously.

_ Calibration                   :  Availed upon request (every 12 months).

_ Removable mouthpiece, easy to clean and replace.

_ Unique 4 digits LCD display

_ 5 Memories for last tested result

_ Illumination for use in dark (Auto shut off after 20 seconds)

Breath Tester used as a monitor, it can indicate when equivalent blood alcohol percentages are below or above the legal limits

DESCRIPTION:

The Alcohol Breath Tester is commonly used at home, bar, laboratory, Police, Military, and Airport or while you are on the road Device provided with extra mouthpieces for convenience. Units activated through a micro switch, after a brief internal self test; the test subject blows through the sensor and result are converted and read within few seconds.

Technical Specifications

Devices:

Measurement mode                     Active mode and Passive mode

Active mode

Measurement range (BAC)               （0-550）mg/100ml BAC

Passive mode

Measurement range (BAC)               （0-550）mg/100ml BAC

Alarm                                 Red , yellow , green alarm limit can be adjusted

Accuracy:

Range （0-88）mg/100ml               ± 4.4 mg/100ml

Range （88-220）mg/100ml             ± 5 %  absolute

Range      >220 mg/100ml             ± 20 % absolute

Measurement range（BrAC）            （0-2.5） mg/L BrAC 

Accuracy:

Range  （0.00-0.40） mg/L             ± 0.020 mg/L

Range  （0.40–1.00） mg/L             ± 5 %  absolute

Range    　  >1.00 mg/L               ± 10 % absolute

Condition： 

Operation temperature range:             0  °C - + 40 °C

Storage temperature range:               - 30 °C - +70 °C

Condition pressure:                     600- 1400 hpa

Condition humidity:                     15 - 95 % r.h.

Min volume:                           1.0 L

Battery:                 7.4V, 2000mAh rechargeable Li-ion battery

Measurement time for one charge:         More than 1000 times testing

Device interface:                        USB data can be transmitted to printer or PC

Dimension (LxWxH):                     200mm x 80mm x 37mm

Weight:                               380g include battery

Specification:

- Measurement Mode: Active Mode and Passive Mode

- Sensor type: Fuel cell Sensor

- Display: 2.8-inch full graphic TFT display

- Mouth Pieces: Yes

- Measurement Range: (0-550) mg/100ml BAC

- Memory: 20,000

- Zeroing Time: < 5 sec

- Operating Temp: -5C +50ºC

- Printer: In-Built.

- Real Time clock: Yes.

- Measurement time: < 10 sec

- Battery: 7.4V, 1300mAH rechargeable Li-ion battery

- Device Interface: USB data can be transmitted to Printer or PC

- Software Moment: Data transmit and storage option

- Dimension: 180mm x 70mm x 30mm

- Weight: 250gm

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Professional Alcohol Breath Analyser Model – A30

Touch Screen with Inbuilt Thermal Printer

20,000 Memories with GPS.

Data collection report using PC Software utility

Additional Information:

• Production Capacity: 100
• Delivery Time: with in 7 working days
• Packaging Details: KIT

Professional Alcohol Breath Analyser Model – A20

Touch Screen with Inbuilt Thermal Printer

20,000 Memories with GPS.

Data collection report using PC Software utility

This Breath Analyzer with Inbuilt Printer    A50 is mainly known for rough and tough use.

Features:

• Fuel cell Sensor with 2.8-inch Touch Screen
• Inbuilt Thermal Printer with 20,000 Memories
• Data collection report using PC Software utility.

Sensor: Semiconductor alcohol sensor
2 Warm-up time: Within 10 seconds
3 Respond time: Within 5 seconds
4 Operating temperature range: 5 ~ 40 °C
5 Detection range: 0.000% - 0.199% BAC
                               0.000‰-1.990‰ BAC
                               0.000 - 0.995 mg/l
6 Digital display results (% BAC, ‰ BAC, mg/l)
7 Quick response and resume
8 Auto power-off
9 Orange-colored backlight
10 Low voltage indicator 
11 Power input: 3V (2 x AAA alkaline battery, not included)
12 Unit size: 116 x 45 x 15 mm       Print size: 25 x 13 mm

amrutha

                 Key Specifications/Special Features

             FDA:

o    ???Built-in printer (optional) 

o    Built-in GPS 

o    50,000 tests records stored in memory 

o    4.3" color touch screen 

o    3G/Wi-Fi

o    Press-button mouthpiece release

o    Photo capture

o    Provide evidential records by auto capturing while subject blowing 

o    USB PC connection

·         Size: 118 * 68 *29 mm

·         Sensor: Highly selective semi-conductive oxide alcohol sensor

·         Response time: 6 sec.

·         Warm up time: 10 sec.

·         Recovery time (sensor purge): 30 sec.

·         Battery: 9V Battery.

·         External power supply: 12V DC adapter (not included)

·         Accuracy: ±10% at 0.05ºC

·         ±10% at 0.02ºC

·         Detection range: 0.000~0.200% BAC; 0.000~1.000mg/L BrAC

·         Operation: 15-35 80% RH

·         Digital display: Four digits in numeric readout Tester

·         Packing: 5pcs of mouthpieces, User’s manual, Cigar-Jack DC adapter

The AT188 personal breathalyzer has a digital display, more compact, easy to use and provides accurate readings. Applications: This device is best used to help your friends and colleagues make responsible decisions after consuming alcohol.

Features: Advanced flat surfaced sensor Portable and small size design No touch healthy design Low voltage indication Use AAA battery Technical data Sensor

Product Features                                                                                            . Passive and Active mode
. Menu operation, easy to use
. Results review on the device
. Data memory for 50,000 measurement
. Wireless printer

SPECIFICATIONS

_ Build in DSP microprocessor technology, Sensor Highly selective semi-conductive oxide.  CE approval by FIMKO

_ Warm up time             :  less than 20 seconds (typical)

_ Power source               :  9V NI MH Rechargeable battery.

 _ Size                              :  115x60x23mm

_ Measuring range          :  0.00-2.0(1.00mg/L)

_ Accuracy                      :  +/- 0.015¼A at 0.05ºC

_ Blowing time               :  4 to 5 seconds continuously.

_ Calibration                   :  Availed upon request (every 12 months).

_ Removable mouthpiece, easy to clean and replace.

_ Unique 4 digits LCD display

_ 5 Memories for last tested result

_ Illumination for use in dark (Auto shut off after 20 seconds)

Breath Tester used as a monitor, it can indicate when equivalent blood alcohol percentages are below or above the legal limits

DESCRIPTION:

The Alcohol Breath Tester is commonly used at home, bar, laboratory, Police, Military, and Airport or while you are on the road Device provided with extra mouthpieces for convenience. Units activated through a micro switch, after a brief internal self test; the test subject blows through the sensor and result are converted and read within few second

1   ABOUT THE DEVICE 

The AlcoStar G3 is new generation alcohol analyzer. The last technology has been used in this device.

AlcoStar G3 has been used fuel cell sensor which doesn’t react with the other      substances.

While a person is blowing into it, the device controls and determines the quantity of expired air. This ensures that the sensor receives only deep lung air which reflects the blood alcohol content correctly.

AlcoStar G3 is easy to use with 3 buttons.

2   APPLICATIONS 

The AlcoStar G3 has been developed for the fast and accurate measurement of the alcohol level in a person’s breath. It is suited for professional alcohol checking.

AMRUTHA

•   Sensor                                          Fast fuel cell

•   Measurement range                        0-1OOmg/ 1OOml

•   Measurement time                         Minimum 1 second, adjustable

•   Zeroing time                                 < 5 seconds

•   Blow volume                                    1.0L or according to customer requirement

•   Display                                            Digital and full graphic backlight display

•  Data store                                    up to 50'.XJ



AMRUTHA 


MANUFACTURES IN DELHI IN INDIA